Application :
Mild Steel and Stainless Steel
Brief product introduction :
Certified by MPA Germany to match EN 12413:2007 + AI:2011 Standard.
High cutting efficiency and excellent stability.
Best-in-class life span
WHATSAPP +971 50 9384501
PHONE +971 4 8816600
EMAILinfo@hwmorton.com
ADDRESS
P.O.Box: 126356, Dubai, UAE
9” Cutting Disc
Table Information
| ITEM | SIZE | TYPE-GRIT | CODE | DIMENSION | MAX SPEED |
|---|---|---|---|---|---|
| Cutting Disc | 9”INCH x 3MM | T42-A30R BF | C10903DA30R42T | 230 x 3.0 x 22MM | 6650 r.p.m. | 80 m/s |
Product Album
Safety Tips
Don’t grind near flammable materials. Grind and sand in well-ventilated areas whenever possible. Wear eye and face protection when working with any abrasive products. Wear a dust mask or approved respiratory protection.
Wear hearing protection. Pay attention to the noise exposure, and make sure you’re protected when it exceeds established threshold levels.
Wear safety gloves. Pay attention to where sparks are flying. Direct sparks away from your body and away from anyone else in the room.
Don’t wear loose-fitting clothing while grinding. Wear long-sleeved shirts or arm guards and long pants. If the tool you’re working with starts to chatter or vibrate, stop at once. Find the cause of the problem, and fix it before you go any further. Use your abrasives on a first-in, first-out basis. Rotate your stock to keep the oldest abrasives ready at hand.