Application :
Mild Steel, Surface Polishing & Grinding, Weld Seam Grinding, Rust Removing.
WHATSAPP +971 50 9384501
PHONE +971 4 8816600
EMAILinfo@hwmorton.com
ADDRESS
P.O.Box: 126356, Dubai, UAE
Flap Disc
Features :
Good flexibility, high tensile and bending strength.
High economic efficiency.
High stock removal rate.
Low noise and no-clogging.
Table Information
| ITEM | SIZE | TYPE-GRIT | CODE | DIMENSION | MAX SPEED |
|---|---|---|---|---|---|
| Flap Wheel | 4.5”INCH | GRIT 60 | T29-4.5 x A60 | FLA45A60T29A | A60-115 x 22.23 MM | 13300 r.p.m. | 80 m/s |
| Flap Wheel | 4.5”INCH | GRIT 80 | T29-4.5 x A80 | FLA45A80T29A | A80-115 x 22.23 MM | 1300 r.p.m. | 80 m/s |
| Flap Wheel | 4.5”INCH | GRIT 120 | T29-4.5 x A120 | FLA45A120T29A | A120-115 x 22.23 MM | 1300 r.p.m. | 80 m/s |
Product Album
4.5”INCH A60
4.5”INCH A80
4.5”INCH A120
Safety Tips
Don’t grind near flammable materials. Grind and sand in well-ventilated areas whenever possible. Wear eye and face protection when working with any abrasive products. Wear a dust mask or approved respiratory protection.
Wear hearing protection. Pay attention to the noise exposure, and make sure you’re protected when it exceeds established threshold levels.
Wear safety gloves. Pay attention to where sparks are flying. Direct sparks away from your body and away from anyone else in the room.
Don’t wear loose-fitting clothing while grinding. Wear long-sleeved shirts or arm guards and long pants. If the tool you’re working with starts to chatter or vibrate, stop at once. Find the cause of the problem, and fix it before you go any further. Use your abrasives on a first-in, first-out basis. Rotate your stock to keep the oldest abrasives ready at hand.